女人高潮内射99精品,亚洲精品国产综合99,亚洲高清中文字幕一区二区三区,亚洲国产中文综合专区在,黄色免费在线网址

How to maintain BYD stand-on electric forklift-

These data fully demonstrate that lithium-ion battery forklifts have been widely recognized by the market, and the electrification, new energy, and intelligence of forklifts are becoming new highlights

Technical parameters of portable lifting forklift: Name: Electric hydraulic lift forklift Model: ND-500J Battery: 48V12ah Motor: 500W Weight: 115kg Loading capacity: 500kg Fork length: 924mm Total size when unfolded: 1950X575X1290mm Rated load: 500kg Maximum load: 500kg Working voltage: 48v 2

The steering angle of the handle is greater than 180 degrees, and the vehicle body is shorter, which makes the turning radius of the vehicle smaller and increases the flexibility of operation

The cost of using explosion-proof electric transport vehicles is more than 20% less than that of pure manual transportation

If necessary, add 45# hydraulic oil

Mechanical structure To achieve synchronous lifting of hydraulic cylinders, mechanical synchronization is often the simplest and lowest-cost solution

Ambient temperature: -20℃～+40℃ 4 Turn (1) Steering is controlled by a control arm, and the steering angle can be anywhere within the range of 90° in both the left and right directions

※ Hydraulic function is normal

The basic operation of an electric pallet truck is to raise and lower the forks, and to move the vehicle forward and backward

Reversing 1

The second reason is that the density of the electrolyte is too high

The power manager can regularly monitor the battery status

How to maintain BYD stand-on electric forklift- Check whether the insulation and connecting parts are damaged or loose

What should you pay attention to when operating a forklift in winter? Do not operate the hydraulic system before the hydraulic control system oil becomes hot, otherwise the hydraulic components will be damaged, and in severe cases, a pump explosion accident will occur

It is very necessary to add a camera behind the forklift to give the driver an eye, which greatly helps the driver to avoid collision when reversing

However, no matter how good the equipment is, if it is not properly maintained, it will frequently malfunction and its service life will not be long Strengthen safety management at the work site

It can effectively prevent the occurrence of fire and explosion and other dangerous situations in explosion-proof environment, so as to ensure the safety of use in explosion-proof environment

The main feature is that in order to overcome the overturning moment generated by the goods, a counterweight is installed at the tail of the forklift

When cracks appear in the welding parts of the body of the electric pallet truck, secondary welding should be carried out in time

Among so many kinds of batteries, how should we choose to buy a battery with high cost performance, good quality, long battery life and durability? Putting aside the price of forklifts, electric transport truck manufacturers have a few suggestions for everyone In addition, the width of the right-angle stacking channel should also be considered, which means that the electric forklift can safely pass through when turning 90 degrees in the corridor In response to the above problems, the safety inspection plan proposed in this section is as follows: Loading device: ① It is designed with a pallet positioning device and a cargo size over-limit sensor, which will issue an alarm signal when the cargo width, length, or height exceeds the limit; ② It is designed with a cargo overweight sensor, which will issue an alarm signal when the cargo is overweight; ③ It is designed with a cargo position over-tolerance detection sensor and a sensor for judging the presence or absence of cargo

BYD forklifts still perform well in cold chain logistics and have huge room for market expansion

, Ltd

How to maintain BYD stand-on electric forklift-

For example, in the logistics of pharmaceutical products, pharmaceutical logistics warehousing has the characteristics of high environmental requirements, high distribution frequency, and timely distribution

Many smaller manufacturers do not have such high requirements for forklifts, so they can choose relatively small electric forklift equipment, which can not only be carried with the vehicle, but also light in weight and occupies a smaller area The operation using pallets is efficient, safe and stable, so it has now been widely used in production, transportation, warehousing and other fields

Generally, the number of charge and discharge times of forklift lead-acid batteries is about 1,500 times, and the service life is about 3-5 years

When the counterbalanced electric forklift is on a curved road or narrow aisle, or when passing through a door or an irregular road surface, the operator must slow down There is a tortoise and rabbit regulator on the handle, and the tortoise speed and rabbit speed can be switched freely (5) Throttle valve, installed in the pipeline of the lifting hydraulic cylinder, its function is to increase the flow resistance of the oil, and ensure that the fork descends slowly when the lifting hydraulic cylinder releases pressure Have a level of education that is appropriate for the type of special equipment operation for which the forklift license is applied; 4

It is also called a palletizing forklift

(1) Ordinary internal combustion forklifts: They are generally powered by diesel, gasoline, liquefied petroleum gas or natural gas engines

Especially for warehouse trucks, the warehouse has a small forklift space, a dim environment, and a severely obstructed vision

This is mainly due to the high proportion of self-produced parts

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info